Nagios with Centrify Authentication

If you have installed Nagios Core on Linux servers with Centrify installation for Active Directory (AD) integration, this post would help you to enable Nagios Authentication with AD.

Simply follow the below steps

  1. Install Centrify & Join with your AD
  2. Install & Configure Nagios core
  3. Open Nagios’ httpd configuration using vim & comment the below four lines for both …/sbin & …/share folder.

Continue reading

Star-CCM+ Performance Improvement

There are couple of methods available to improve performance of Star-CCM+ jobs in parallel environment using IBM Platform MPI on HPC.

Here, I discuss about Core locking / CPU binding method which significantly improves performance. Core locking  will binds a rank to a logical processor (cores) to prevent a process from moving to a
different logical processor after start-up.

Continue reading

Solved: Insufficient core for numeric phase of sparse decomposition

 Issue Description:

MSC Nastran jobs sometimes comes out in the middle with an error like  below in .f06 file.

*** USER FATAL MESSAGE 6136 (UDSFA)

INSUFFICIENT CORE FOR NUMERIC PHASE OF SPARSE DECOMPOSITION.

USER ACTION: INCREASE CORE BY  126613566 WORDS

 

Root Cause:

 This happens when ever insufficient memory is allocated to the job or exceeds the initial estimated memory calculated by the application. Continue reading

Torque Resource Manager with Maui Cluster Scheduler on Ubuntu 12.04 LTS

Ubuntu Packages Prerequisites

apt-get install g++ gpp kcc
apt-get install libssl-dev
apt-get install libxml2-dev
apt-get install libtool
apt-get install openssh-server

Torque & Maui Downloads

Torque Resource Manager:- http://www.adaptivecomputing.com/support/download-center/torque-download/
Maui Cluster Scheduler (Registration required):- http://www.adaptivecomputing.com/support/download-center/maui-cluster-scheduler/

Continue reading

Ansys Fluent 14.5 Distribution using Platform MPI on Windows workstations

Test Workstations Details

Node Hostnames: t1.test.com, t2.test.com, t3.test.com
Cores: 8 cores/node

Prerequisites

• Ansys Fluent 14.5 should be installed on all the workstation in the default installation location.
• Platform MPI Installation & service should be running on workstations (Installation Instructions can be found at “%AWP_ROOT145%\commonfiles\MPI\Platform\8.2.1\Windows\INSTALL_Platform-MPI_README.mht”)
• Connect all three workstations to AD or have identical username & password across all the workstations

Hostname File Preparation

Crete a text file called hostnames.txt on the user’s desktop
In my case, Each cores will be defined per line. You can also follow the Platform MPI hostfile definitions.
Cores Distribution Example : Fore cores from t1.test.com, fore cores from t2.test.com & all eight cores from t3.test.com

Continue reading

maui init.d script for ubuntu

Do the small modifications on descriptions, variable names & paths of the ‘debain.pbs_server’ file to generate the maui init.d script.

#!/bin/sh
### BEGIN INIT INFO
# Provides:          maui
# Required-Start:    $local_fs
# Should-Start:
# Required-Stop:
# Should-Stop:
# Default-Start:     2 3 5
# Default-Stop:      S 0 1 6
# Description:       Maui job scheduler
### END INIT INFO

# TO INSTALL DO (as root):
#    cp maui /etc/init.d/maui && update-rc.d maui defaults

DESC="MAUI Job Scheduler"
NAME=maui
DAEMON=/opt/maui/sbin/$NAME
MAUI_DAEMON=$DAEMON
MAUI_HOME=/opt/maui/spool
PIDFILE=$MAUI_HOME/maui.pid
SCRIPTNAME=/etc/init.d/$NAME
export MAUI_DAEMON MAUI_HOME PIDFILE

 Continue reading 

Torque & Maui Important Commands

root@n1:~# checknode n1

checking node n1

State:      Idle  (in current state for 00:06:12)
Configured Resources: PROCS: 4  MEM: 995M  SWAP: 2017M  DISK: 1M
Utilized   Resources: SWAP: 223M
Dedicated  Resources: [NONE]
Opsys:         linux  Arch:      [NONE]
Speed:      1.00  Load:       0.000
Network:    [DEFAULT]
Features:   [NONE]
Attributes: [Batch]
Classes:    [batch 4:4]

Total Time: 1:47:36  Up: 1:47:36 (100.00%)  Active: 00:07:51 (7.30%)

Reservations:
NOTE:  no reservations on node  Continue reading 

MSC.Nastran 2005 r3 help file

nastran (Version 2005.5 Jun  6 2006 06:26:23)

THIS PROGRAM IS CONFIDENTIAL AND A TRADE SECRET OF MSC.Software
Corporation.  THE RECEIPT OR POSSESSION OF THIS PROGRAM DOES NOT CONVEY
ANY RIGHTS TO REPRODUCE OR DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE,
OR SELL ANYTHING HEREIN, IN WHOLE OR IN PART, WITHOUT THE SPECIFIC
WRITTEN CONSENT OF MSC.Software Corporation.


 General keywords:
    after=time
      UNIX systems only.
      Hold execution until the specified time.  Also used by "submit".  See
      the at(1) man page for further information.  There is no default for
      this value.
    append={"yes","no"}
      Concatenate the F06, F04, and LOG files.  The file type of the
      concatenated file is "out".  The default is "append=no".
    batch={"yes","no"}
      UNIX systems only.
      Execute in background.  Overridden by "aft" and "queue".  The default is
      "batch=yes".  If running in an NQS/NQE batch job, the default is
      "batch=no". Continue reading